# Emblaser Pro

### Manuals, Firmware & Files

- [User Manual](https://ln5.sync.com/dl/e177c3130/p76ga4ta-pik7rxv5-xfqy3eej-gi78d462)
- [LightBurn](https://release.lightburnsoftware.com/LightBurn/Release/)
- [Firmware](https://ln5.sync.com/dl/0c6c98a70/2kt2evi7-rbuhp6e2-g3imbg9p-pxfb8jsr)
- [Emblaser Bundle](https://ln5.sync.com/dl/2ad4f8dc0/si9ii2jz-87ur2aii-83dgprsv-sd5fya5t)
- [Material Library](https://ln5.sync.com/dl/a36d3bdf0/8w77hdws-hpfnccp9-quxhdwjc-jeaesrzr)

### Setting up your machine

#### Setting up LightBurn

#### Import Emblaser Pro Bundle

#### Setting up WiFi

#### Laser Livestream Setup Videos

### Learn to use your machine

#### Tutorial – Material Hold Down Clips

#### Tutorial – Control the EPro with Macros

### Caring for your machine

#### Care Checklist

#### Cleaning the Lens Cap

#### Replacing Exhaust Fans

#### Refill Cooling System

#### Removing SD-Card

#### Replacing Controller Board

#### Re-packing the Emblaser Pro

#### Replacing the 60W Laser Module

#### Cleaning the Exhaust Fans

#### Cleaning / Lubricating the rails

#### Repairing the SD-Card