# Emblaser 2

### Manuals, Drivers & Firmware

- [User Manual](https://ln5.sync.com/dl/50ffd6a70/i8wbuygw-4xh4unew-yvfmn9bx-6aagk46m)
- [Spec Sheet](https://ln5.sync.com/dl/329207150/88yj4itu-sjbug42y-f8wuxtrp-kugbzgba)
- [3D Printable Files](https://ln5.sync.com/dl/38063aad0/i9pirata-nzdsi55i-km6awghw-x43rkpfx)
- [Drivers](https://ln5.sync.com/dl/aee989a70/iivn84mt-asxdns5s-qsrq534y-6ejuaa8a)
- [Firmware](https://ln5.sync.com/dl/5d95ccc60/jpbs5urb-z68xesn9-36mvpmna-3w4sgtvr)
- [Misc Files](https://ln5.sync.com/dl/011d0feb0/b8zrxm6n-ym8n4zv7-xuuria53-gnwwv4pn)

### Support Articles

- [‘Alarm Lock’ Error / Long Beep](/content/article/alarm-lock-error-long-beep/ "‘Alarm Lock’ Error / Long Beep"/index.html)
- [10w Laser Unit Installation Instructions](/content/article/10w-laser-unit-installation-instructions/ "10w Laser Unit Installation Instructions"/index.html)
- [10W Laser Unit Maintenance](/content/article/emblaser-2-core-10w-laser-unit-maintenance/ "10W Laser Unit Maintenance"/index.html)
- [Cutting/Engraving Acrylic Info.](/content/article/cutting-engraving-acrylic-information/ "Cutting/Engraving Acrylic Info."/index.html)
- [How to Access/Replace the SD Card](/content/article/how-to-access-replace-the-sd-card/ "How to Access/Replace the SD Card"/index.html)
- [How to align the Aperture Nozzle](/content/article/how-to-align-the-aperture-nozzle/ "How to align the Aperture Nozzle"/index.html)
- [How to clean the Laser Driver PCB](/content/article/how-to-clean-the-laser-driver-pcb/ "How to clean the Laser Driver PCB"/index.html)
- [How to remove and replace the Gantry Carriage](/content/article/how-to-remove-and-replace-the-gantry-carriage/ "How to remove and replace the Gantry Carriage"/index.html)
- [How to remove the Laser Unit](/content/article/how-to-remove-the-laser-unit/ "How to remove the Laser Unit"/index.html)
- [How to remove the Workspace Camera](/content/article/how-to-remove-the-workspace-camera/ "How to remove the Workspace Camera"/index.html)
- [How To Remove/Replace The Laser Carriage Assembly](/content/article/how-to-remove-replace-the-laser-carriage-assembly/ "How To Remove/Replace The Laser Carriage Assembly"/index.html)
- [How to replace the Corner Interlock PCB](/content/article/how-to-replace-the-corner-interlock-pcb/ "How to replace the Corner Interlock PCB"/index.html)
- [How to replace the Laser Carriage Fans](/content/article/how-to-replace-the-laser-carriage-fans/ "How to replace the Laser Carriage Fans"/index.html)
- [How to replace the Laser Driver PCB](/content/article/how-to-replace-the-laser-driver-pcb/ "How to replace the Laser Driver PCB"/index.html)
- [Inserting / Removing the FFC (Flat Flexible Cable)](/content/article/inserting-removing-the-ffc-flat-flexible-cable/ "Inserting / Removing the FFC (Flat Flexible Cable/index.html)")
- [Installing 10w Laser unit – Emblaser 2](/content/article/installing-10w-laser-unit-emblaser-2/ "Installing 10w Laser unit – Emblaser 2"/index.html)
- [Installing LightBurn on a Mac](/content/article/installing-lightburn-on-a-mac/ "Installing LightBurn on a Mac"/index.html)
- [Installing Windows 7/8 Drivers](/content/article/installing-windows-7-8-drivers/ "Installing Windows 7/8 Drivers"/index.html)
- [Lens Cleaning (Gen1 Lens Housing with Silicone Aperture Nozzle)](/content/article/lens-cleaning-gen1-lens-housing-with-silicone-aperture-nozzle/ "Lens Cleaning (Gen1 Lens Housing with Silicone Aperture Nozzle/index.html)")
- [Lens Cleaning Process (Brass AA Nozzle)](/content/article/lens-cleaning-process-brass-aa-nozzle/ "Lens Cleaning Process (Brass AA Nozzle/index.html)")
- [Lid Interlock Alignment](/content/article/lid-interlock-alignment/ "Lid Interlock Alignment"/index.html)
- [Lubricating Lid Hinges](/content/article/lubricating-lid-hinges/ "Lubricating Lid Hinges"/index.html)
- [Lubricating the Linear Rails](/content/article/lubricating-the-linear-rails/ "Lubricating the Linear Rails"/index.html)
- [Machine Homing](/content/article/machine-homing/ "Machine Homing"/index.html)
- [Reconnecting the Z-Axis Belt](/content/article/reconnecting-the-z-axis-belt/ "Reconnecting the Z-Axis Belt"/index.html)
- [Replace Air Assist from V1 to V2](/content/article/replace-air-assist-from-v1-to-v2/ "Replace Air Assist from V1 to V2"/index.html)
- [Replacing the Controller Board](/content/article/replacing-the-controller-board/ "Replacing the Controller Board"/index.html)
- [Replacing the Emblaser 2 Lid](/content/article/replacing-the-emblaser-2-lid/ "Replacing the Emblaser 2 Lid"/index.html)
- [Replacing the Exhaust Fan](/content/article/replacing-the-exhaust-fan/ "Replacing the Exhaust Fan"/index.html)
- [Resetting to Default Settings](/content/article/resetting-to-default-settings/ "Resetting to Default Settings"/index.html)
- [Setting up WiFi – Using Angry IP](/content/article/setting-up-wifi-using-angry-ip/ "Setting up WiFi – Using Angry IP"/index.html)
- [The Hidden Perils of Chlorine-Based Materials in Laser Cutters.](/content/article/the-hidden-perils-of-chlorine-based-materials-in-laser-cutters/ "The Hidden Perils of Chlorine-Based Materials in Laser Cutters."/index.html)
- [Trouble Cutting / Low Laser Power](/content/article/trouble-cutting-low-laser-power/ "Trouble Cutting / Low Laser Power"/index.html)
- [Troubleshooting Focus Calibration Issues](/content/article/troubleshooting-focus-calibration-issues/ "Troubleshooting Focus Calibration Issues"/index.html)
- [Updating Firmware (E2 & ECore)](/content/article/updating-firmware/ "Updating Firmware (E2 & ECore/index.html)")
- [Which Lens Unit do I have?](/content/article/which-lens-unit-do-i-have/ "Which Lens Unit do I have?"/index.html)